Speciality Products
Agri-Seal Clear Non-Flat Acrylic Aggregate Glaze Coat Finish
Rust Buster
Logwood Clear Wood Preservative Finish
Clear Wood Finish
Water Borne White Strippable Booth Coating
EV-R-ON Recreational
Deco-Tex Non-Skid Coating
| Agri-Seal Clear Non-Flat Acrylic Aggregate Glaze Coat Finish "The Wet Look" — 103-012 |
Product Data Sheet |
Product Description and Intended Use:
A new low 340 V.O.C. Clear Non-Flat Interior/Exterior Acrylic Lacquer Sealer Finish which contains chemical and weather resistant properties to protect, enhance, beautify and retain a desirable natural appeal for a variety of exposed aggregate substrates with the "Wet Look". Agri-Seal is designed to be used as an excellent glaze coat for concrete floors and walls, as a terrazzo, tile or magnesite sealer, and as a clear waterproof sealer on masonry or tilt up concrete surfaces, and a variety of aggregate substrates where the coating is not required to seal bridged cracks or voids.
MSDS
103-012
| Rust Buster "Rust Converting Primer" — 101-572 |
Product Data Sheet |
Product Description and Intended Use:
Rust-Buster is a low V.O.C. non-pigmented synthetic acrylic latex "Rust Converting Primer" that absorbs rust by chemically converting a rusty substrate to a stabilized iron and steel surface. The visual appearance actually changes from a milky film solution to and excellent corrosion resistant satin black magnetite oxide type of coating, ready for a variety of different product finishes. Coatings V.O.C. does not exceed 250 V.O.C.G.P.L. Rust-Buster is specifically formulated for use on rusted steel and iron surfaces such as tanks, machinery, tools, portable buildings and sheet metal. This product is an excellent primer for items such as wrought iron fences and stair rails, lawn, patio and garden furniture, or any ornamental metal fixtures that have become rusted. Rust-Buster can be top-coated with a variety of industrial maintenance finish products such as alkyds, vinyl and acrylic latexes, lacquers, chlorinated rubbers, along with extreme high durability epoxies and urethane base finishes. This product has the added features of low odor, soap and water clean-up and low risk of flammability.
Note: Do not repackage rust contaminated material in the Rust-Buster original container/packaging. Rust-Buster product that has been used/exposed to rusty substrates should not be intermixed with the remains of the fresh Rust-Buster product.
MSDS
101-572
| Logwood Clear Wood Preservative Finish 101-352 |
Product Data Sheet |
Product Description and Intended Use:
Simpson Coatings Logwood Clear Wood Preservative Finish is a penetrating finish formulated with a premium quality blend of selected alkyd resins and fortified natural oils. This proven product adds beauty and depth to the natural color of exterior wood surfaces, while providing protection from the harsh weathering elements of the great outdoors. It can be applied to a variety of unpainted wood substrates such as: rustic wood sheet siding, rough sawn shakes and shingles, natural log and log siding, wood fencing, porches and decks.
MSDS
101-352
| Clear Wood Finish 108-300 |
Product Data Sheet |
Product Description and Intended Use:
A versatile, rapid drying, non-yellowing, tough, acrylic coating designed to preserve, enhance and retain the natural beauty of interior and exterior wood substrates. This Clear Wood Finish is a safe easy and odorless way of finishing new, bare/raw or stained wood such as: rough sawn beams, paneling, fences, garden furniture, vaulted wood ceilings, porch eves and rails.
MSDS
108-300
| Water Borne White Strippable Booth Coating 108-172 |
Product Data Sheet |
Product Description and Intended Use:
A water borne strippable protective coating designed for use over sealed wood and metal substrates, specifically for the case of removing the film from the interior surfaces of spray booths.
MSDS
108-172
| EV-R-ON Recreational 108-XXX |
Product Data Sheet |
Product Description and Intended Use:
EV-R-ON Recreational Court Finish is an extremely resilient, adherent, water reducible acrylic coating system that is specifically formulated with inorganic, non-iron/low iron color pigments, selected silica and other high performance resins, all of which produce an ultimate, very durable, hard, non-glare, color retentive, impact and abrasion resistant finish, that withstands even the most adverse environmental and weather conditions, along with meeting the surface demands of a large variety of sports activities. EV-V-On is technically designed as a finishing system over a variety of asphalt, masonry/concrete games courts such as: tennis, basketball, volleyball, handball, squash, rollerblading/roller hockey, and indoor soccer courts. These coatings are also a very suitable resurfacing system for: asphalt/concrete sidewalks, walkways, driveways, swimming pool decks/diving areas, hot tub areas, patios, interior/exterior recreational and sports shower/locker room facilities, boat decks, handi-cap walkways/ramps, hospital corridor floors, running/jogging pathways and track/bicycle lanes or for use in environments wherever there is a need to resurface architectural asphalt and masonry/concrete substrates. EV-R-ON is available in 4 ready mix court colors, including EV-R-On White that is suitable for tinting a variety of pastel/midtone color using up to 4 ounces of colorant.
MSDS
108-087 White
108-144 Redwood
108-169 Green
| Deco-Tex Non-Skid Coating 104-XXX |
Product Data Sheet |
Product Description and Intended Use:
Deco-Tex is a single component water reducible monolithic modified alkyd floor coating formulated to provide a non-skid flexible and soft tread surface. This coating is designed as a non-skid surface coating over wood, metal, concrete/masonry substrates such as decks, patios, sidewalks, steps/stairwells, swimming pool decks/diving areas, boat decks, handicap walkways/ramps, hospital corridors, floors, recreational shower/locker room areas and asphalt pathways or for use in environments wherever there is a need for safe foot traffic conditions. Deco-Tex is available in 2 ready-mix colors, including an off-white tint base suitable for tinting pastel tones with up to 4 ounces of colorant, as well as a clear base suitable for tinting deeptone colors using up to 16 ounces of colorant.
MSDS
104-081 Black
104-082 Off-White
104-083 Light Gray
104-128 Clear
