550 Lacquers
Mar-Proof 550 Lacquer Finish
Mar-Proof 550 Precatalyzed Lacquer
Water White 550 Lacquer
550 Water White Premium Lacquer
550 Water White Premium Precatalyzed Lacquer
Contractors 550 Lacquer
550 Pigmented Lacquers
Ready to spray 550 White Lacquer Undercoat
Non Stearate 550 Lacquer Undercoater
550 Single Component Vinyl Sanding Sealer
Non Stearate 550 Clear Sanding Sealer
| Mar-Proof 550 Lacquer Finish "Furniture Finish" — 102-51X |
Product Data Sheet |
Product Description and Intended Use:
Mar-Proof 550 Lacquer Sanding Sealer and Finishes are premium quality, high solid, nitrocellulose lacquers that have been specifically formulated to meet the requirements of the newly adopted 550 V.O.C. Air Quality Rules/Regulations for Architectural/Wood Coatings. These products are uniquely designed to produce a high solids "Water White" completely clear (no amber tone) film with excellent flowing qualities, while requiring minimal sanding sealer with less sanding in between coats. These Lacquer Sealer/Finish Systems when used in tandem with Simpson Coatings Stain, provides a top-line heat/mar resistant finish system that is impervious to water, detergent, alcohol and is resistant to common food stain substances such as mustard and catsup.
Mar-Proof Lacquer Sealer and finishes are designed to be used for professional application over fine furniture, kitchen and bathroom cabinetry, wood paneling, interior wood doors and trim, or any decorative interior wood fixture such as stair rails and spindles, fashionable wood moldings and accents, that requires a high durable mar/impact resistant finish.
MSDS
102-511 Sanding Sealer
102-512 Gloss
102-513 Semi-Gloss
102-514 Flat
102-517 Satin
| Mar-Proof 550 Precatalyzed Lacquer "Solvent Base" — 102-59X |
Product Data Sheet |
Product Description and Intended Use:
Mar-Proof Precatalyzed Lacquers are extremely durable single component self-sealing modified nitrocellulose finishes that meet or exceed the rigid performance standards of the National Kitchen Cabinet Association (N.K.C.A.). They are specifically formulated to meet the requirements of the Architectural/Wood Product Coatings Rules/Regulations and V.O.C. Emission Schedules in the various marketed Air Quality Districts. Using these lacquer products in tandem with Simpson Coatings non-stearated Clear Vinyl Sanding Sealer #103-111C or Single Component 550 Vinyl Sanding Sealer #103-881, clearly provides the ultimate moisture resistant wood finishing system that has true "Water White" color clarity (non amber tone), with an exceptional level of resistance to harsh chemicals/solvents, abrasion and alkali. Mar-Proof 550 Precatalyzed Lacquers are formulated for use on all types of interior wood products such as kitchen cabinets, furniture, mill work, doors, decorative trim/molding and paneling or anywhere a hard abrasion and moisture resistant finish is desired.
MSDS
102-592 Gloss
102-593 Semi-Gloss
102-594 Flat
102-597 Satin
Note: Simpson Coatings Mar-Proof 550 Precatalyzed Lacquers are self-sealing finishes and are not recommended for use over conventional Stearated Sanding Sealers/Finishes.
| Water White 550 Lacquer "Solvent Base" — 102-3XX |
Product Data Sheet |
Product Description and Intended Use:
Water White 550 Lacquer Sanding Sealer and Finishes are premium quality alkyd modified nitrocellulose lacquers that are completely clear (no amber tone) and have been formulated to meet the requirements of the newly adopted 550 V.O.C. Air Quality Rules/Regulations for Architectural/Wood Coatings. These products are specifically designed to produce a water white, excellent build, tough alcohol, scratch and mar resistant finish. Water White 550 Lacquer Sanding Sealer and Finishes are excellent finishes for professional application on white or light color stained wood as well as deep tone stained wood substrates used in tandem with Simpson Coatings Stain/Woodtone Sealers. These sealer/finishes are especially popular for use over high grade cabinet work, table tops, bar counters, bar tops, furniture, store and office fixtures, musical instruments, or for protecting and enhancing bronze, brass or other decorative metal artifacts.
MSDS
102-349 Sanding Sealer
102-350D Semi-Gloss
102-352 Flat
102-355 Satin
102-358 Gloss
| 550 Water White Premium Lacquer "Solvent Base" — 102-81X |
Product Data Sheet |
Product Description and Intended Use:
550 Water White Premium Lacquers are a premium quality line of alkyd modified nitrocellulose lacquers formulated for the professional applicators economy. These Lacquer Sanding Sealers/Finishes are specifically designed for the Pro Shop Environment for finishing interior wood substrates where multiple coats may be applied rapidly to obtain a solid, tough finish with "Water White" clarity. These Lacquer Finishes are recommended for use on all types of interior wood products, such as, kitchen cabinets, furniture, millwork, doors, decorative molding and paneling or anywhere a hard finish is desired. 550 Water White Premium Lacquers are available in a Sanding Sealer and five different gloss finishes.
MSDS
102-811 Sanding Sealer
102-812 Gloss
102-813 Semi-Gloss
102-814 Flat
102-817 Satin
| 550 Water White Premium Precatalyzed Lacquer "Solvent Base" — 102-89X |
Product Data Sheet |
Product Description and Intended Use:
550 Water White Premium Precatalyzed Lacquers are extremely durable single component self-sealing, modified nitrocellulose finishes that meet or exceed the rigid performance standards of the National Kitchen Cabinet Association (N.K.C.A.). They are specifically formulated to meet the requirements of the Architectural/Wood Product Coatings Rules/Regulations and V.O.C. Emission Schedules in the various marketed Air Quality Districts. Using these lacquer products in tandem with Simpson Coatings Non-Stearated Clear Vinyl Sanding Sealer #103-111C or Single Component 550 Vinyl Sanding Sealer #103-881, clearly provides the ultimate moisture resistant wood finishing system that has true "Water White" color clarity (non amber tone), with an exceptional level of resistance to harsh chemicals/solvents, abrasion and alkali. 550 Water White Premium Precatalyzed Lacquers are formulated for use on all types of interior wood products, such as, kitchen cabinets, furniture, millwork, doors, decorative trim/molding and paneling or anywhere a hard abrasion and moisture resistant finish is desired. 550 Water White Premium Precatalyzed Lacquers are available in four different gloss finishes.
MSDS
102-892 Gloss
102-893 Semi-Gloss
102-894 Flat
102-897 Satin
102-898 Dead Flat
| Contractors 550 Lacquer "Solvent Base" — 102-4XX |
Product Data Sheet |
Product Description and Intended Use:
The Contractors 550 Lacquer Sealer and Finishes are clear interior high solids lacquers formulated to meet the requirements of the newly adopted 550 V.O.C. Air Quality Rules/Regulations for Architectural/Wood Coatings. These Lacquer Sealer and Finishes are designed intentionally for the contractors economy, specifically for professional application to open or closed grain interior finished wood surfaces, where multiple build coats may be applied rapidly to obtain a solid, tough, yet decorative finish. The Contractors 550 Lacquer Finishes are recommended for cabinets, doors, woodwork, virtually any finishing hard woods such as birch or ash, as well as soft woods like pine or fir.
MSDS
102-449 Sanding Sealer
102-460 Gloss
102-461 Satin
102-471 Semi-Gloss
102-473 Flat
Note: Contractors 550 Lacquer Sealer/Finishes are not recommended for use over white, naturals or lightly colored wood stains.
| 550 Pigmented Lacquers "Solvent Base" — 102-7XX |
Product Data Sheet |
Product Description and Intended Use:
550 Pigmented Lacquers are premium quality, high hiding, pigmented nitrocellulose lacquer finishes that have been specifically formulated to meet the newly adopted 550 V.O.C. Air Quality Rules/Regulation requirements for Architectural/Wood Coatings. These rapidly drying lacquer finishes are designed for the professional/commercial wood coatings applicators that require the finish to be tough, mar resistant with excellent color and gloss retention. Designed for professional spray application, 550 Pigmented Lacquers have excellent build and adhesion qualities for a variety of interior wood substrates. They are highly recommended for finishing wood furniture, cabinets, paneling, doors/trim, decorative molding and musical instruments. The 550 Pigmented Lacquers are available in two ready-mix colors, white and black in four different gloss finishes. In addition, Simpson Coatings features three pigmented tint bases in 4 different gloss finishes, i.e., 550 white & pastel tint base for tinting pastel colors using up to 4 ounces of colorant per gallon, 550 pigmented deeptone base for tinting midtone deep colors using up to 8 ounces of colorant per gallon, and 550 pigmented masstone base for tinting ultra deep colors using up to 16 ounces of colorant per gallon.
MSDS
102-720 Gloss White Lacquer Tint Base
102-721 Gloss Lacquer Deeptone Base
102-722 Gloss Lacquer Masstone Base
102-726 Gloss Black Lacquer
102-730 Semi-Gloss White Lacquer Tint Base
102-731 Semi-Gloss Lacquer Deeptone Base
102-732 Semi-Gloss Lacquer Masstone Base
102-736 Semi-Gloss Black Lacquer
102-740 Satin White Lacquer Tint Base
102-741 Satin Lacquer Deeptone Base
102-742 Satin Lacquer Masstone Base
102-746 Satin Black Lacquer
102-750 Flat White Lacquer Tint Base
102-751 Flat Lacquer Deeptone Base
102-752 Flat Lacquer Masstone Base
102-756 Flat Black Lacquer
Note: Simpson Coatings 550 Pigmented Lacquer Tint Bases have been formulated/designed to be used with Creanova Inc., Chroma-Chem 844 Industrial Colorant System. For best results in gloss/color retention, tint control, the Chroma-Chem 844 Colorant System or an equivalent Non-Aqueous Industrial Tint System should be used when tinting Simpson Coatings 550 Pigmented Lacquer Tint Bases.
| Ready to spray 550 White Lacquer Undercoat 102-551 |
Product Data Sheet |
Product Description and Intended Use:
A low V.O.C. alkyd modified nitrocellulose undercoater specifically designed for direct ready to spraysealer/surfacer application on raw wood.
| Non Stearate 550 Lacquer Undercoater 102-470 |
Product Data Sheet |
Product Description and Intended Use:
Designed to be used on interior wood substrates as an undercoater and to be finish coated with Simpson Coatings Pigmented Lacquers, Pre-Catalyzed, CAB Acrylic Lacquers, Conversion Varnish and Urethane Finishes.
| 550 Single Component Vinyl Sanding Sealer "Solvent Base" — 103-881 |
Product Data Sheet |
Product Description and Intended Use:
550 Single Component Vinyl Sanding Sealer is a clear, fast drying, easy sanding, stearate free, high solid sanding sealer designed to give a higher building, superior moisture resistant sealer system under Catalyzed Finish Systems such a: Clear and Pigmented Conversion Varnishes, Urethane Finishes, and Un-Catalyzed Finish Systems such as: Water White Clear and Pigmented CAB Acrylic Lacquers, as well as Precatalyzed Lacquer Systems. This fast drying, clear 550 Single Component Vinyl Sanding Sealer is specifically formulated to meet the performance standards of the Institutional/Commercial, Office Furniture, Cabinets, and Interior Wood Finishers Markets. Used in tandem with a variety of different clear and pigmented finishes, it is the ideal sanding sealer for providing improved film building properties, adhesion, and moisture resistance for a more technically advanced, durable finishing system over kitchen cabinets, vanities, chairs, tables, desks, wood paneling and over white, natural or lightly colored wood substrates anywhere a hard durable moisture resistant finish with true water white color clarity is required.
Note: 550 Single Component Vinyl Sanding Sealer #103-881 must be sanded prior to applying all topcoat finishing products.
| Non Stearate 550 Clear Sanding Sealer 102-440 |
Product Data Sheet |
Product Description and Intended Use:
This product is designed to be used on interior wood substrates as a Clear Sanding Sealer, which are to be finished coated with Simpson Coatings Clear or Pigmented CAB Acrylic Lacquers, Precatalyzed Lacquers, Conversion Varnishes and 2 part Urethane Finishes.
Note: This product must be sanded prior to coating with a finish product for proper adhesion.
